T-REX Power Fast Bonding Adhesive Sealant
T-Rex Power is a high quality, neutral, elastic, 1-component adhesive sealant based on SMX® Polymer with a very high initial tack. T-Rex Power is a high strength sealant / adhesive that can hold 320kg’s per 10cm2 with a 1 Second immediate grab
Packaging
Item Code | Size | Colour | units/box |
---|---|---|---|
121968 | 290 mL | bright white | 12 |
121970 | 290 mL | steel grey | 12 |
124435 | 290 mL | jet black | 12 |
128462 | 290 mL | quick silver | 12 |
128463 | 290 mL | beach sand | 12 |
134912 | 290 mL | clear | 12 |
127507 | 600 mL | bright white | 12 |
147559 | 600 mL | steel grey | 12 |
Features & Benefits
- Fast grab reducing the need for initial support
- Fast curing
- Good extrudability
- High shear strength after full cure (no primer)
- Stays elastic after curing and very sustainable
- No odour
- Can be painted with water based systems
- Good weather and UV resistance
- Does not contain isocyanates and no silicones
- Good adhesion on slightly moist substrates
- Water potable
Applications
Sealing and bonding in the building and construction industry
Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc)
Elastic structural bonding in car and container industry
Bonding
Soudal T-Rex Power has an excellent adhesion on almost all substrates. Soudal T-Rex Power has been tested on the following metal surfaces: steel, AlMgSi1, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403. Plastics that were tested include: polystyrene, polycarbonate (Makrolon®), PVC, polyamide, glass fibre reinforced epoxy and polyester (GRP).
Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test
Instructions
Surfaces and materials should be clean and free of dust and grease. When used as adhesive: Apply T-Rex Power in beads or dots onto the material which needs to be bonded, press the material firmly onto the substrate for instant grab. Final strength will be achieved 24 hours after application. When used as sealant: Apply T-Rex Power in a regular bead and smoothen immediately with Soudal Joint Finish or a soapy solution. Application temperature: +5°C until +35°C.