SMX® -30 Plus
SMX-30 Plus is a solvent, and water-free universal parquet adhesive. Suitable for bonding many types of parquet floors onto suitable indoor substrates.
Packaging
| Item Code | Size | Colour | Units/Box |
| 120625 | 600 ml | Light Oak | 12 |
| 176772 | 18 kg | Light Oak | 1 |
Coverage
1000 – 1200 g per m² by use of the SOUDAL – notched trowel
Features & Benefits
- Ready to use, no mixing required
- Single component
- EC-1R label: very low emissions
- Solvent free
- Contains no water
- Free of isocyanates
- Easy to apply
- Forms stable peaks once applied by a notched trowel or spreader comb
- Rapid cure and build up of final bond strength
- High final bond strength (according to EN14293)
- Remains permanently elastic
- Suitable for underfloor heating
Applications
SMX-30 Plus is a solvent, and water-free universal parquet adhesive based upon SMX Polymers. Suitable for indoor bonding of all types of wooden floors such as solid, stab, pre-finished, and on-end parquet, wood-plank, wood-block and laminates. Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard) , including floors with underfloor heating. SMX-30P is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces.
Instructions
- Apply the adhesive to the surface by means of notched SOUDAL trowel N°11. For parquet sizes smaller than 60mm wide and 300mm long notched SOUDAL trowel N°3 is recommended. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure a perfect adhesion. Loading the parquet with weights will improve the final bond strength. Wait at least 16hrs before sanding and finishing the parquet.
Accessories
Swipex
Trowel