142SP Contact Adhesive (Sprayable)
Ready to use, toluene free, pink, sprayable contact adhesive based on polychloroprene (Neoprene®)
Packaging
- 20 L
Coverage
100 – 300 ml/m², each side
Features & Benefits
- Ready to use, on a sprayable viscosity
- Immediately fixed
- Fast strength build-up.
- Moisture resistant.
- Resistant against high temperatures
- Toluene free
Downloads
Applications
- Used in two-sided adhesions on various materials, wood and stratified decorative coveringpanels (Formica®, Resopal®,…), veneer, stairsteps and nosings, PVCplinths, leather, cork, textile, with each other for wood, wood derivatives, stone, concrete, plaster, metal and other smooth, non-porous surfaces.
- Meant for all adhesions where a fast bonding is required, for adhesions of two non-porous materials.
- Only for interior use
Instructions
- Sprayable with the traditional spray
installations or with pneumatic spray guns.
Opening: 2,5 mm or wider Pressure: 3 to 5 bar
Pressure on can: 0,5 to 2 bar, also sprayable
with a HVLP gravity feed spray gun Remark:
The adhesive doesn’t spray like a paint, it
forms drips and wisps. When the adhesion
doesn’t have to happen immediately or when
bonding two non-porous materials: Apply the
adhesive two-sided with the spray gun. Make
sure that the adhesive is sprayed equally, the
coverage has to be min. 80%. For strong
porous materials (plaster, concrete, …) a
second adhesive layer has to be applied, ± 20
mins after the first layer. About 5 to 10 mins,
depending on the circumstances, let dry and
close within 20 minutes after applying. The
bonding happens immediately. Then press
hard with a roller or tap strongly with a rubber
hammer. If the adhesion has to be adapted (at
least 1 substrate has to be porous) or when
bonding two porous materials: It’s sufficient to
apply 142SP Contact adhesive on one of the
two sides Close immediately after usage