Key Takeaways:
Use polyurethane adhesive foam to bond interior partition walls quickly and cleanly.
Soudabond Easy replaces traditional mortar to save you up to 50 percent of your installation time.
One 750ml canister replaces up to 25 kg of heavy powder adhesive.
The flexible bond adheres perfectly to concrete, brick, natural stone, and wood.
Bonding Non-Load-Bearing Interior Walls
Building interior block walls takes massive amounts of time if you mix traditional cement. You have to haul heavy bags of powder and mix them with water. Soudabond Easy is a high-performance polyurethane adhesive foam that eliminates this heavy labour completely. We offer it in Gun Grade, Hand Held, and Genius Gun formats. You just grab the can and start bonding your cellular concrete, brick, or sand-lime blocks immediately.
This PU adhesive foam cuts your installation time by up to 50 percent. You do not need electricity or water on site. One single 750ml canister replaces up to 25 kg of traditional mortar adhesive. This provides a massive weight reduction for your transport and your physical workload. The product also delivers high initial adhesion even in low temperatures.
Traditional mortar dries hard and brittle. Soudabond Easy provides a flexible bond that absorbs minor structural movements without cracking. It cures rapidly so you can start your finishing work after only one hour. It bonds strongly to almost any building substrate including natural stone, metal, cement, and painted surfaces.
Ready to start your project? Use our Store Locator to find your nearest Soudal stockist and grab the right block adhesives today.
FAQs
Can I use Soudabond Easy for load-bearing walls?
No. You must only use this adhesive foam for non-load-bearing interior walls and partitions. Structural load-bearing walls require engineered mortar systems.
How long does it take for Soudabond Easy to dry?
The foam hardens very rapidly. Your wall is usually ready for plastering or further finishing work after just one hour.
Does this foam work on wooden substrates?
Yes. It provides excellent adhesion to wood, concrete, brick, and even metal or painted substrates.
How do I clean the adhesive gun?
Attach a can of professional gun cleaner immediately after you finish your job. Flush the clear liquid through the gun to dissolve the wet polyurethane foam inside the barrel.