Soudafoam FR HY Expanding Foam (Fire-Rated)
Soudafoam FR HY (High Yield) is a high quality, one-component fire rated / resistance, self-expanding, ready to use polyurethane foam, where the canister is provided with a thread so it can be used on a gun. It contains HCFC- and CFC-free propellants which are not harmful for the ozonelayer.
Packaging
| Item Code | Size | Colour | Unit/box |
|---|---|---|---|
| 169456 | 750 mL canister (Straw) | Pink | 12 |
| 153085 | 750 mL canister (Gun Grade) | Pink | 12 |
Note/s*
We suggest consultation with a fire engineer or certifier prior to application of all fire rated products.
Features & Benefits
- On average 25% more foam than a standard Soudafoam FR
- Fire resistant in a joint (EN 1366-4) for 240 minutes
- High filling capacity
- Good adhesion on all surfaces (except PE, PP and PTFE)
- High insulation value, thermal and acoustic
- Very good bonding properties
- Increased shelf life up to 15 months
- Not UV-resistant
- Very low VOC content → EC1+
- Meet Australian standard AS1530.4 for fire-resistant jointing
Downloads
| Technical Data Sheet
| Safety Data Sheet
| European Technical Statement
| Solid Wall Construction TR.1 – AS1530.4 & AS4072.1
| Solid Wall Construction TR.2 – AS1530.4 & AS4072.1
| Cable & Tray Penetrations – Report FP14153.01 – AS1530.4 & AS4072.1
| Cable & Tray Penetrations – Report FP14153.01 – Summary of Detail Only
| Acoustic Testing Results for Fire-Rated Products
Applications
- Installation of fireproof doors and windows.
- Sealing of fire retardant joints in walls and ceiling.
- Sealing of all openings in roof constructions.
- Apply of an acoustic baffle.
- All foam applications in static joints.
- As part of the ‘Soudal Fire Range’ assortment for penetration seals and joints.
Instructions
- Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates a preliminary adhesion test is recommended. Remove pressure from the applicator to stop. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foamcleaner or acetone. Prior to using the Gun & Foamcleaner, test whether surfaces are affected or not. Especially plastics and lacquer or paint layers can be sensitive to this. Cured foam can only be removed mechanically or with Soudal PU-Remover.