Soudabond Easy – PU Foam Adhesive Spray
Soudabond Easy Genius Gun is a fast curing hand held PU Adhesive with a specially designed patented trigger mechanism ensuring precise dosage and removing the need for an additional gun. It is easy to use, can be operated with one hand and is re-usable up to 4 weeks later. In addition to its strong bonding performance the adhesive will foam up to allow filling and insulation of gaps, cracks, joints and cavities.
Features & Benefits
- Excellent coverage
- 1 can = 25kg bag of masonry adhesive
- 1 can = 25kg bag of AAC [Hebel] adhesive
- 1 can = 25kg bag of plasterboard adhesive
- 1 can = 56 cartridges of construction adhesives [336 lineal metres]
- 30% faster installation
- No mixing
- Trigger control and re-usable for 4 weeks
Applications
Bonding of insulation materials. Installation and bonding of drywall panels Building of non-load bearing walls made from AAC blocks and other types of building blocks. Due to its foaming performance also suitable for filling and insulating gaps, cracks, joints and cavities. Bonding of timber subfloors to timber or metal joists. General bonding applications where a construction adhesive would normally be used.
Packaging
- 750 mL
Downloads
Soudabond Easy Gun
Soudabond Easy is a ready-to-use, single component, self-expanding polyurethane adhesive for clean, efficient and economical permanent bonding of insulation panels and plasterboard in building and construction.
Packaging
- 750 mL
Features & Benefits
- Covers 14m2
- 1 can = 25kg bag of masonry or AAC adhesive
- 30% faster installation
- No mixing
- Accurate trigger control
Downloads
Applications
Bonding of insulation materials. Installation and bonding of drywall panels. Building of Non-load bearing walls made from AAC blocks and other types of building blocks. Bonding of timber subfloors to timber or metal joists. General bonding applications where a construction adhesive would normally be used. Due to its foaming performance also suitable for filling and insulating gaps, cracks, joints and cavities.
Instructions
Prior to using the product, cover all adjacent areas for protection against soiling. In windy conditions, precautions must be taken to ensure that SOUDABOND EASY cannot contaminate components, objects or persons in the vicinity. Good ventilation must be ensured for indoor use. Wear protective goggles and gloves. Shake the aerosol can for at least 20 seconds. Open the cover and fold the tube horizontally After extended periods of non-use, the can must be shaken again to obtain the required adhesive quality! Adjust the adhesive bead to the required diameter with pushing on the genius gun harder or softer. (The emptier the can, the more force should be set). The can must be held vertical during application.
A distance of 1 to 2 cm must be maintained between the nozzle and insulation panel/substrate while spraying.
Apply pressure to the insulation panel within about 8 minutes (20°C-65% R.H. – this time is shorter at higher
temperature/humidity and longer at lower temperature / humidity). Do not tap or remove and reapply panels as this will damage the adhesive structure and reduce the adhesive strength substantially. At high temperatures and low humidity in particular, curing can be accelerated by lightly spraying the adhesive bead with water. When finished, wait approximately 1 minute until the foam stops dripping out. Detach the butterfly plug from the cap and screw it on top of the red Soudamax adapter. Clip cap back in place to lock trigger.
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.