145SPT Transparent Contact Adhesive (Sprayable)

Ready to use, toluene free, sprayable contact adhesive based on polychloroprene (Neoprene®)

Packaging

Approx. 50ml/m², each side

Used in two-sided adhesions on various materials, wood and stratified decorative coveringpanels (Formica®, Resopal®,…), veneer, stairsteps and nosings, PVCplinths, leather, cork, textile, with each other for wood, wood derivatives, stone, concrete, plaster, metal and other smooth, non-porous surfaces.
Meant for all adhesions where a fast bonding is required, for adhesions of two non-porous materials.
Only for interior use

Sprayable with the traditional spray installations or with pneumatic spray guns.Opening: 2,5 mm or wider Pressure: 3 to 5 bar Pressure on can: 0,5 to 2 bar, also sprayable with a HVLP gravity feed spray gun Remark:The adhesive doesn’t spray like a paint, it forms drips and wisps. When the adhesion doesn’t have to happen immediately or when
bonding two non-porous materials: Apply the adhesive two-sided with the spray gun. Make sure that the adhesive is sprayed equally, the coverage has to be min. 80%. For strong porous materials (plaster, concrete, …) a second adhesive layer has to be applied, ± 20 mins after the first layer. About 5 to 10 mins, depending on the circumstances, let dry and
close within 20 minutes after applying. The bonding happens immediately. Then press hard with a roller or tap strongly with a rubber hammer. If the adhesion has to be adapted (at least 1 substrate has to be porous) or when
bonding two porous materials: It’s sufficient to apply 145SPT Contact adhesive on one of the two sides Close immediately after usage.