wooden flooring products

Timber Flooring Range

SMX 30 Plus


Description
SMX-30P is a solvent, and water-free universal parquet adhesive. Suitable for bonding many types of parquet floors onto suitable indoor substrates.
EC1 Plus SMX-30 PlusCharacteristics
  • Ready to use, no mixing required
  • Single component
  • EC-1R label: very low emissions
  • Solvent free
  • Contains no water
  • Free of isocyanates
  • Easy to apply
  • Forms stable peaks once applied by a notched trowel or spreader comb
  • Rapid cure and build up of final bond strength
  • High final bond strength (according to EN14293)
  • Remains permanently elastic
  • Suitable for underfloor heating
Applications
SMX-30P is a solvent, and water-free universal parquet adhesive based upon SMX Polymers.
Suitable for indoor bonding of all types of wooden floors such as solid, stab, pre-finished, and on-end parquet, wood-plank, wood-block and laminates. Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard) , including floors with underfloor heating. SMX-30P is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces.

DOWNLOADS
Technical Data Sheet
Safety Data Sheet
EC1R+ Certificate
CSIRO Test Report
CSIRO Test Report 28 Days
Emission Test Report
VOC Certificate
Testimonial


SMX20 Plus


smx 20 plus

Description
SMX-20 PLUS is a universal timber flooring adhesive based upon SMX® hybrid polymers. Suitable for indoor bonding of engineered boards, ready to use timber and solid wood. SMX-20 PLUS contains no water or solvents, minimising the risk of deforming the parquet to a minimum. Once fully cured (approx. 24 hrs) an elastic and non-shrinkable adhesive layer is formed, which is resistant to moisture and heat
Features & Benefits
  • Fast curing
  • Walk on after 3 hr, sand after 16 hrs
  • Ready to use, no mixing required
  • Remains permanently elastic
  • Free of isocyanates, solvents & waterSMX-20 Plus - EC1 Logo
Applications
Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard, existing ceramic tiles, including floors with under floor heating.

DOWNLOADS
Technical Data Sheet
Safety Data Sheet
EC1R+ Certificate
VOC Certificate


Parquet & Timber Sealant


Parquet & Timber Seal

Description
TIMBER & PARQUET SEALANT is a high-quality, plasto-elastic one-component sealant based on acrylic dispersion
Characteristics
  • Ready to use
  • Solvent free
  • Very easy to apply
  • Colourfast and waterproof after curing
  • Can be varnished after curing
  • Very good adhesion on many porous surfaces
Applications
  • Filling of joints with movements up to 15%
  • Filling sealant for joints in parquet-, or laminate floors
  • Connection joints between parquet floors, skirting board and walls
  • Also suitable for cracks in wooden floors

DOWNLOADS
Technical Data Sheet
Safety Data Sheet
Colour Chart


Moisture Barrier 1 Coat


moisture barrier

Description
A two-part waterborne epoxy coating system designed to act as a single coat moisture and vapour barrier primarily over rigid cementitious substrates. Designed specifically for use with the Soudal range of timber flooring adhesives and waterproofing membranes
Characteristics
  • Single coat application
  • Can be covered after 16 hours
  • Convenient equal part mixing
  • Water clean-up
  • Environmentally friendly
Applications
In-situ concrete, Brick, block and stone work. Fibre cement and AAC systems. Pre cast and tilt up panels

DOWNLOADS
Technical Data Sheet
Safety Data Sheet


Trowels


trowels

Description
German quality spreaders made by Pajarito
Large toothed N°11 for larger types of timber & parquet floor boards (more than 60x300mm)
Small toothed N°3 for smaller types of timber & parquet floor boards (less than 60x300mm)

Build-the-future-Logo1